Power/signal cable - Type 4026

Construction characteristics

Conductor (center): 1.50 mm² bare copper conductor IEC 60228
class 5 insulated with HDPE
Nominal wall thickness 0,70 mm, nominal diameter 2,95 mm. Colours: blue, red, yellow, white (4 each)
Tape: Protective polyester
Inner sheath: SEBS TPR, nominal wall thickness 2,10 mm. Nominal diameter 11,35 mm
Shielded twisted pair: 0.50 mm² bare copper conductor IEC 60228 class 5 insulated with HDPE
Nominal wall thickness 0.43 mm, nominal diameter 1.75 mm
2 conductors twisted together white-blue with a polyester tape,
tinned copper drain wire
7 x 0.3 and aluminium/polyester tape
Polyethylene sheath, nominal thickness 0.30 mm, nominal diameter 4.35 mm
Colour white numbered 1-11, (11 ea)
Filling compound: Silicone filling compound
Outer jacket: Hydrolysis UV resistant Polyurethane. Nominal wall thickness 1.70 mm. Colour black

Mechanical characteristics

Diameter: 23.50 mm
Weight in air: 698 kg/km
Weight in seawater: 253 kg/km
Weight in fresh water: 265 kg/km
Min. bending radius, static: 118 mm
Min. bending radius, dynamic: 235 mm
Operating temperature range: -30°C - +80°C

Electrical characteristics

Operating voltage: 600 V for 0.50 mm² conductor
1,000 V for 1.50 mm² conductor
Conductor resistance: < 39.00 Ω/km at 20°C for 0.50 mm² conductor
< 13.30 Ω/km at 20°C for 1.50 mm² conductor